Text
Text writes letters on a face of the part. A new text shows the part number.
When to use it
Section titled “When to use it”Use text for part numbers, position codes or a note for the crew.
Fields
Section titled “Fields”| Field | Unit | Range or options | Default | What it changes |
|---|---|---|---|---|
| Position X | mm | from 0 | 1500 | Start of the text along the part. |
| Position Y | mm | from 0 | 60 | Baseline of the text across the face. |
| Face | Top, Bottom, Front, Back | Front | The side of the part the processing is on. | |
| Text height | mm | from 1 | Automatic | Letter height. Unset means the machine decides. |
| Text | Nr 1 | The text to write. A new text starts as "Nr" and the part number. |
Default: what Add fills in on a 3000 mm part of 120 x 120 mm.
Add a text
Section titled “Add a text”- Select the part in the Parts list.
- Under Extra processings, click Add.
- Type
textin the search field and pick Text. - Set Face, Position X and Position Y. Position Y is the text baseline, not its middle.
- Type the Text. Leave Text height at Automatic to let the machine decide, or set a height.
- Check that the part shows a green check. If not, open the Issues tab.
Machine export
Section titled “Machine export”| Format | Status | Details |
|---|---|---|
| BTLx | Partly supported | Text. |
| BVN (Hundegger) | Partly supported | Operation 0601, up to 20 characters. |
| BVX2 (Hundegger) | Not written | Not written. |
A file that the app writes is not a check by your machine. See Export for what each format is for.